Curran Erase (Graffiti Remover)

CURRAN ERASE

Graffiti Remover

Solvent based product used for the removal of graffiti from most surfaces.

WHAT ARE THE KEY BENEFITS OF THIS PRODUCT?

ERASE quickly and thoroughly dissolves aerosol paint, felt-tipped pen ink, ballpoint pen ink and other graffiti from stone, fibreglass,concrete and brickwork. It is ideal for use on walls and brickwork, and other surfaces subjected to graffiti. It should not be used on painted surfaces or aluminium metal.

WHAT IS THIS PRODUCT?

ERASE is an effective, low odour product that dissolves ink and paint graffiti from any surface subject to graffiti.

HOW DOES IT WORK?

ERASE is a very powerful solvent-type paint and ink removal agent. It is water-emulsifiable so it can be rinsed away effectively with water. It is a low odour liquid with outstanding performance and it is a thickened liquid so it will “cling” to vertical surfaces. ERASE will not leave unwanted chemical odours after being used. It is classified as Dangerous Goods.

PROPERTIES: (COLOUR, ODOUR, PH, FOAM)

COLOUR – Transparent brown liquid

ODOUR – Orange citrus

pH = >13

PRODUCT USE & APPLICATION: (INCLUDE DILUTION RATE)

Graffiti is easiest to remove when it is fresh.

Metal, Fibreglass, Tiles, Glass

Wear gloves and safety glasses when using this product. Brush ERASE onto the graffiti. Apply a thick uniform film. Do not apply to aluminium. Scrub for a minute with a brush to assist penetration. Smooth over then leave to work for 5 minutes. Scrub the graffiti with a brush or a nylon scourer. Wipe the graffiti off with a clean rag, or rinse off with a hose. If any graffiti is left, repeat steps 1 to 4. Wash over all areas with clean water.

Concrete or Brick

Use a stiff nylon or wire brush. Wear gloves and safety glasses when using this product. Brush ERASE onto the graffiti. Apply a thick uniform film. Scrub for a minute with a brush to assist penetration. Brush over all treated areas then rinse with clean water.

SIZES AVAILABLE:

5lt & 20lt